IR ARO EXP air operated diaphragm pumps in sizes thru 3”.  Cast iron, aluminum, stainless steel, Hastelloy C, polypropylene and PVDF materials of construction.  Flows to 275 GPM. Drum pump, flap valve and powder handling versions available.  Air operated piston pumps in steel and stainless steel construction for pumping high viscosity materials, capable of discharge pressures to 10,000psi.  Complete line of extrusion packages available.  Air system components, including filter/regulator/lubricator combinations.

BJM electric submersible pumps: 1” to 6” discharge, heads to 140 ft, 1/6 thru 30 hp. Available in multiple configurations including; corrosion resistant stainless steel pumps, sump/sewage/sludge pumps, trash/non-clog/solids handling pumps, sand pumps, vortex pumps, slurry agitator pumps, grinder/cutter/shredder pumps, and dewatering/utility pumps.

Chempump Sealless, leakproof canned motor centrifugal pumps. Available in steel, 316SS, Alloy 20 and Hastelloy C.  Nominal hp ratings available from 1 to 150. Temperatures from -400°F to 1,000°F.  G series features more than 100 models in 30 sizes with capacities to 2,000 gpm, heads to 450 ft; system pressures to 5,000 psi. NC series features ANSI design with self-contained diagnostics. Special canned motor drive options available. LE series features canned motor pumps at a price comparable to mechanical seal pumps.

Eastern 316SS, Alloy 20 and Hastelloy C centrifugal pumps in single and multi-stage design. Single and double seals, flows to 85 gpm, heads to 365 ft.  Sealless mag-drive option available.

Eclipse magnetically driven non-metallic gear pumps with absolutely no wetted metallic parts. Available in four sizes with flows to 20 gpm, pressures to 150 psig, and temperatures to 150 F.  For medium to highly corrosive clean liquids used in chemical processing, dosing, and water treatment.

ECO corrosion resistant gear pumps constructed of 316SS, Alloy 20 and Hastelloy C. Flows to 55 gpm, pressures to 100 psig. Single and double seals. Sealless mag-drive option available.

Fybroc non-metallic, corrosion resistant, fiberglass reinforced, thermoset vinyl ester/epoxy pumps designed for corrosive and other difficult liquids.  Available in horizontal ANSI dimensional sealed, mag-drive, close coupled and self priming configurations. Vertical sump pumps in 19 sizes and lengths to 30 feet.  Complete line of aquarium, zoo, and aquaculture pumps for seawater and freshwater applications. Flows to 5,000 gpm, pressures to 205 psig (475 ft).

Goulds Sump, effluent, sewage, & centrifugal pumps for water circulation, booster service and filtration systems. Available in iron, bronze, bronze fitted and stainless steel construction. Submersible, self-priming, end suction and multi-stage models available with motors in ODP, TEFC and XP. Full line of accessories.

Hydra-cell high pressure, hydraulically actuated diaphragm pumps in cast iron, bronze, 316SS, Hastelloy C and non-metallic construction. Flows to 40 gpm, pressures to 2,500 psig. Hydra-cell's metering pump technology is built to exceed API 675 performance standards with "pulse-free" linear flow.

Isochem Sealless, magnetically driven gear and centrifugal pumps constructed of 316SS, Alloy 20 and Hastelloy C. Gear pump flows to 55 gpm, pressures to 225 psig. Centrifugal pump flows to 85 gpm, heads to 365 ft.

Iwaki America  Sealless, magnetic drive centrifugal pumps lined in PFA or ETFE. Flows to 325 gpm, heads to 180 ft. Available in close or long coupled designs.  Small/OEM packaged, magnetic drive, close coupled centrifugal pumps in molded polypropylene or ETFE, fractional to 3 hp (some with dry run capabilities). Semiconductor Products: Non-metallic bellows pumps for hot and cold etch, chemical blend and transfer, pump controllers, pulsation dampeners, photo resist dispensing systems, spiking pumps.

Lutz modular drum and container pumps in aluminum, 316SS, polypropylene, PVDF and Hastelloy C. Wide selection of electric and pneumatic motors. High viscosity drum pumps. Seal and sealless designs available. Tube lengths to 16 feet. Modular flow meters available.

Micropump magnetically driven gear and centrifugal pumps. Flow rates from 0.25 cc/min to 10 gpm. Differential pressures to 200 psig. Static pressure from 30" Hg to 5000 psig. Temperatures from -60F to 400F. Special modifications available. Excellent for high head pressure, low flow applications including pipeline, densitometer and closed loop sampling, OEM, laboratory, and pilot plants.

Moyno 500 Pumps Progressive cavity pumps in cast iron & 316SS. Buna, EPDM & fluoroelastomer stators. Flow rates to 50 gpm, pressures to 600 psig. Variable speed metering capabilities. Sanitary design available.

MTH Regenerative turbine pumps in all iron, bronze fitted and 316SS. Single and multi-stage pumps. Special designs for low NPSHA or high temperature. Flow rates to 100 gpm, discharge head to 1700 ft. Good for high head pressure, low flow applications.

Neptune Hydraulically actuated diaphragm metering pumps for chemical injection, polymer injection and boiler/cooling system chemical metering.  Capacities to 600 gph and maximum discharge pressures to 3000 psi. Electric stroke control available.

Price Pump Cast iron, bronze, 316SS and Hastelloy C centrifugal pumps available as close coupled or pedestal mount. Flows to 500 gpm, heads to 300 ft.  Self priming, vertical short-setting sump and high pressure multi-stage designs also available.

Teikoku sealless, leakproof canned motor centrifugal pumps. Available in 304 and 316SS, Alloy 20 and Hastelloy C. Nominal hp ratings available from 1 to 230. Temperatures from -325°F to 840°F. Flows to 3,000 gpm, heads to 1,650 ft with multi-stage design; pressures to 5,000 psi. Special canned motor drive options available. All pumps available in both horizontal and vertical configurations. ANSI and API designs with self-contained bearing diagnostics.

Tonkaflo multi-stage centrifugal pumps in 316 SS and Noryl. For high pressure, low to medium flow applications such as well injection, R-O and D-I water systems. Flows to 300 gpm, pressures to 700 psi.

Walchem Electronic solenoid drive metering Pumps with outputs up to 20 GPH and pressures up to 250 PSI. Doses at 360 SPM, turndown ratios up to 1800:1. Various material liquid ends, PP, PVC, PVDF and stainless. Waterproof models available. Standard 2-year warranty on liquid end. Mechanically actuated diaphragm pumps with outputs to 114 gph, pressures to 225 psi.  PVC, PVDF, and stainless pump heads, single or three phase power.

Watson Marlow Bredel peristaltic pumps are ideal for fluid transfer, metering, and dispensing in the most demanding process and laboratory applications. They are designed for continuous duty pumping of shear-sensitive fluids, sludges, slurries, viscous fluids, and aggressive acids and caustics.  High flow industrial hose pumps with flows from 0.08 gpm to 350 gpm; discharge pressures to 230 psi; 30 ft suction lift capabilities and can handle up to 4" diameter solids.  Industrial and sanitary tube pump capacities 0.00015 GPD to 17.4 gpm; 3600:1 turndown ratio for superior metering and dosing performance.  All designs can run dry and feature low maintenance/downtime with quick field replaceable hose and tubing.